USAGE METHOL

Tools:
rag,sprinkler,scraper or credit card knife pocket knife
Step1
Clean the body,In order to reduce the stickiness youshould sprinkle some water on the area you plan tostick,and easy adjustment of the position
Step2
Determine the location tobe posted.Scrape the backot the sticker with a tool,and then tear off the bottompaper.(if the sticker is too big,it's best two of threepeople make it together)
Step3
After removing the bottom paper of the label,spraymore water on the side of the label with qlue to reducethe viscosity, which is easy to adjust the position andremove bubbles
Step 4
Cut the sticker to your liking
Step5
Make appropriate adjustments. After confirming the
approxiate position of the graph,wipe off the waterand bubbles repeatedly. Tear off the transparent transfelfilm.(Poke the hard bubbles with a needle)
Step6
Ifthe sticker is attached to the seam of the car door,cut
it with a knife and wrap it so that the sticker and the surface
of the car are fully attached.
Step 7
Do not let the car sticker and the body have any separationor protrusion
Step 8
Try to let the moisture in the car sticker dry out.lf possibleit can be heated and dried appropriately.Depending on the
weather,wash the car again after a or two day.