SPECIFICATIONS
Battery Included: no
Brand Name: NONE
Choice: yes
High-concerned chemical: none
Origin: Mainland China
Warm reminder: The product has been tested for anti-fall. It needs to be pre-pressed for a while at first use, and then it can be used normally. Please see the video below.
Introduction
【Product Name】:Electric booster sprayer
[Product Capacity]: 2L
[MAX air pressure]: 8BAR
[Product Material]: PE + PP + electronic components
【Packing List】:Sprayer * 1 data line * 1 manual * 1
[Individual weight]: about 690g
[Packed Size]:14*31*31CM
[Notes]
1. Spray can black upper cover part by electronic components, please do not wash!!!!
2. The spray bottle is suitable for home cleaning and car cleaning spray non-corrosive liquid. Do not use for spraying acid, alcohol, petrol and other strong corrosive liquid.
3. Please do not exceed the maximum capacity to avoid liquid leakage.
4. There will be a delay of a few seconds when the product is switched on and pressurised, when the product is first switched on there may be liquid dripping from the nozzle, after a few seconds the spray will be normal.
5. After each use, release the residual pressure in the spray bottle, empty the container and clean and rinse it carefully with water.
6. The product will be tested before leaving the factory, a small amount of water left in the pot is normal.
【Product Name】:Electric booster sprayer
[Product Capacity]: 2L
[MAX air pressure]: 8BAR
[Product Material]: PE + PP + electronic components
【Packing List】:Sprayer * 1 data line * 1 manual * 1
[Individual weight]: about 690g
[Packed Size]:14*31*31CM
[Notes]
1. Spray can black upper cover part by electronic components, please do not wash!!!!
2. The spray bottle is suitable for home cleaning and car cleaning spray non-corrosive liquid. Do not use for spraying acid, alcohol, petrol and other strong corrosive liquid.
3. Please do not exceed the maximum capacity to avoid liquid leakage.
4. There will be a delay of a few seconds when the product is switched on and pressurised, when the product is first switched on there may be liquid dripping from the nozzle, after a few seconds the spray will be normal.
5. After each use, release the residual pressure in the spray bottle, empty the container and clean and rinse it carefully with water.
6. The product will be tested before leaving the factory, a small amount of water left in the pot is normal.