SPECIFICATIONS

Brand Name: NONE

Certification: CCC

Display Size: Others

Electronic: No

External Testing Certification: CCC

Hardware Version: 2025

High-concerned chemical: none

Is Batteries Included: no

Item Height: 2.5

Item Length: 20

Item Type: Electrical Testers & Test Leads

Item Weight: 0.1

Item Width: 5

Material: PLASTIC

Model Name: OBDEMOTO 101

Origin: Mainland China

Power (W): 1.5w

Software Update: no

Software Version: 2025

Use: Not Telecommunication

Voltage: 1.5V

Wireless Support: No

OBDEMOTO 101 Electric-Magnetic Faults Indicator Testing Pen Car Ignition System Detector Buzzer

-Magnetic Faults Indicator Testing Pen Car Ignition System Diagnostic Tool Car Fault Detector Buzzer

Specifications:

Non Dismantle Test

The detector is using advanced technology from Germany, it can collect and analyze signals under non-dismantle automotive electrical

parts, Testing results are showed by LED indicator and beeper. Easy to test if there is faults of the automotive electronic parts.

Testing range:

-Coil(traditional coil, double spark coil, dingle spark coil)

-Electric generator, inside fan motor, combination valve(heating, water cooling)

-Emission controling valve, fuel injector, spark plug, hall sensor, electric relay

Instructions:

1.The car to be tested should park at an area with good air condition, can not suck into exhaust emission from engine.

2.The car to be tested should be far away from smoke and fire source;The gasoline engine and chargeable battery is possible to occur

explosive air, so it is very necessary to prepare fire extinguish gears accordingly.

3.During test process, it is necessary to avoid the moving parts and heat source to protect tester and testing equipment.

4.To be far away from the cooling fan of engine

5.Do not put other equipment on the battery which is possible to make the battery inside to be Short, which may cause hurt or damage

of tester and equipment.

6.Do to turn off the ignition switch before connecting or remove electrical parts.

7.Do not leave the car during the test

8.Please confirm the gear position of the car : automatic is at P; manual is at blank; Do push tight of manual brake ; put blocks

before the driving tires

9.Please read relative warnings from car manufacturer,pay attention to the important warning information.