SPECIFICATIONS
Brand Name: NONE
Choice: yes
DIY Supplies: Handworking
Department: Unisex-adult
High-concerned chemical: none
Material: Stainless Steel
Model Number: SS001 Pro / SS002 Pro
Origin: Mainland China
Pattern: Others
Type: Screwdrivers
Operating Instructions:
Notes:
(This is a precision tool. Please nudge the pick blade gently and apply moderate tension. Do not use excessive force to avoid damage.)
Step 1: Select the matching SS002 Pro 2‑in‑1 pick tool. Confirm the tool model matches the lock cylinder specification, and check all parts for deformation or wear.
Step 2: Unfold the positioning tension leaf. Align the tool tip with the keyhole, insert it slowly and smoothly into the lock cylinder until fully seated.
Step 3: Apply moderate turning tension on the tension leaf with your left thumb. Do not apply excessive force to prevent damage to the lock cylinder and tool.
Step 4: Gently push the picking blade with your right hand. Toggle each pin in sequence, feel the feedback of each pin’s click, and set every pin into correct position.
Step 5: After all pins are set, keep steady tension on the leaf and rotate the tool smoothly to open the lock.
Step 6: After unlocking, release tension gently. Pull the whole tool out from the keyhole, fold the positioning leaf, clean and store the tool properly.
(Note:1.️Lockpick devices and locksmithing devices can only be used for the purposes permissible under the applicable law and regulations. Misuse of the product for any illicit activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.2.Please allow 1-3cm error due to manual measurement.3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!)
